Microprocessor Added

The fine pitch 32bit microprocessor was placed on the prototype device.


The testing was done to ensure that there were no bridges between the pins.

In the photo a tall bolt is visible. The bolts in the photo will not be present in the end user devices. The bolts are added on the development unit to allow permanent connection of power onto the device. On this development device long extension cables are added to allow the rechargeable battery to be located further from the PCB.

The end user device will not have any of the wires, and the battery will be placed on the top of the two nuts.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s