Status – Hardware and Firmware

The table below lists the current status of the hardware functional tasks and (when required) the corresponding firmware driver source code.

Function Hardware Firmware
Reverse protection for magnetic connector Tested not req.
Lithium-ion battery charging Tested todo
Battery level sensing Tested todo
Voltage regulation Tested not req.
In circuit device programming (dev only) Tested not req.
Microprocessor high speed operation Tested todo
Microprocessor sleep mode operation todo todo
Inbuilt flash storage reading todo todo
Inbuilt flash storage clearing and writing todo todo
Three full color LEDs 1 of 3 done todo
Bluetooth serial data link (master mode) todo todo
Bluetooth RSSI proximity measurement todo todo
Vibration motor todo todo
Accelerometer XYZ sensing todo todo
Accelerometer single tap detection todo todo
Accelerometer double tap detection todo todo
Bluetooth beacon with plug pack todo not req.
USB cable with BT and Win7 bridge program todo todo
Android Bluetooth bridge app todo todo

The not req. indicates that driver source code is not required for the particular functional area.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s