Sugru – Alternative to Resin Casting

As an alternative to making mould and casting the electronics in resin epoxy is the possibility of the end user using the sugru to form their own enclosure.

six9_400_cable-fix-stills-5

The image above shows the sugru formed using the finger squish method.

Users would need ot use thin white sugru above the illuminated LEDs but would be free to form their own shape and add their own colored sugru.

An additional advantage, other than removing the requirement for production of resin casting, is that it is understood from a non legal view, that the end user assembling the final device from the component parts and sugru housing would allow the talisman to be classified as components and not a final consumer electronics device. Because of this, there would be no requirement for the Talisman to undergo the expensive FCC electrical and emission testing standard process.

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s